Metal Brake Line Kit for 83-85 Vanagon

This is a metal brake line replacement kit for an 83-85 Vanagon.  It should work with any 1.9l Vanagon.  If you wonder about it, you should check your build date.  It should be from 8/1983 to 7/1985.  If you are going to restore your Vanagon or just want to be sure it is in top condition, you should inspect the metal brake lines under the van.  If there is a single pit or bubble, that can cause your brake system to fail.  These lines are coated with plastic line the original lines.  They lasted over 20 years so you should be good for a while.  Also they are not prebent and the lengths may not be exactly the same length as your old ones.  Usually they are a little bit longer, but you can just change the bend a little bit to compensate.

This Kit includes 10 Pieces:

2 x 150mm- Front Caliper to Brake Hose

1 x 300mm- Rear T to Right Rear Brake Hose

2 x 600mm- Rear Brake Hose to Rear Wheel Cylinder on each side

2 x 650mm- Front T to Left Front Hose and  Rear T to Left Rear Brake Hose

1 x 1300mm- Front T to Right Front Brake Hose

1 x 1900mm- Brake Master Cylinder to front T

1 x 2200mm- Brake Master Cylinder to Brake Pressure Reducer

Made by JP Group 1161500810