Ignition Wire Set for 83-92 Waterboxer Vanagon

Pin Type Cap Ignition Wire Set for 83-92 waterboxer Vanagon (1.9l or 2.1l).  There are two different connectors that were used in the Vanagon.  A bushing style connector and a pin style.  This set of plug wires only works on the pin style connection.  You want to check your distributor cap and your coil.  They need to have pins in the center of each location where the spark plug wire end attaches.  If it doesn't then you need to replace your coil with a new one (the new ones all have the pin type connection in them), and your cap with a pin version of that (03212).  These wires are made by STI which is a quality manufacturer.

If you wish to use the old bushing style connection, you can buy the wires that use that here: 09180